Home Sondriel Round Alabaster Wall Light
-15%New
Regular price $410.00 USD Sale price $350.00 USD
SKU: HL-WL-26090102-1

Free shipping and customs duties for US customers

Embark on a journey of light and shadow in 2026 — Up to 20% OFF.
Infuse your life with warm light.

10%

All Lighting

Copied!

15%

Spend $2000 Save

Copied!

20%

Spend $5000 Save

Copied!
Size: ∅ 9.8″ x H 23.6″
Color: Gold + White
Add to Wishlist Add to Compare
Guaranteed Safe Checkout
Description

The Sondriel Round Alabaster Wall Light hangs a lit stone disc from a slim brass stem, the way a pendant hangs from a chain. A brushed brass ring frames a round panel of natural alabaster, and a solid brass cap sits at the centre — so the glow reads as a halo rather than a lamp, with the light escaping around the edge of the cap and out through the stone.

The stem is the unusual part. Most wall sconces sit tight against the plaster; this one drops well below its mounting plate, which lets it fill a tall empty wall the way a piece of art would. Hung beside a bed or a mirror it puts the light at the right height without needing the junction box to be at that height.

Light passes through the alabaster rather than off it, so the veining shows in the glow and the tone stays warm and low. A round alabaster wall light for bedside walls, hallways, entryways, bathroom vanities and either side of a fireplace — as a single piece or as a matched pair.

 

×2
Buy as a Pair & Save
Sconces almost always go up in twos. Select the option marked (×2) above — a set is priced below two singles, and both are cut from the same glass batch, so the tint matches exactly. Ordering separately risks a visible difference between the two.

 

Natural Stone Variation
Alabaster patterns vary from piece to piece — the stone you receive will differ from the one pictured. Each piece with natural textures is unique.


Why This One

A Sconce That Hangs Instead of Sitting

 
01

The Stem Puts Light Where You Need It

The disc hangs well below its mounting plate on a slim brass stem. That means the junction box can sit high on the wall while the glow lands at reading height, which is rarely where the wiring already is.

 
02

A Brass Cap That Makes a Halo

A solid brass disc covers the centre of the stone, so the light comes out as a ring around it rather than as one bright face aimed into the room. You get the glow without ever looking at the source.

 
03

Alabaster's Warm, Even Glow

Light travels through the stone rather than bouncing off it, so no part of the disc becomes a bright spot. What reaches the room is soft and honey-toned, deepening where the veining runs thick and lifting where the stone thins.

 
04

Brushed Brass Against Pale Stone

The ring, stem and cap carry a hand-brushed finish with visible grain, the only warm metal note in an otherwise pale fixture. Unlit, that contrast is what keeps the disc from disappearing into a white wall.

Natural alabaster framed in brushed brass on a metal stem — veining differs from piece to piece

 

Specifications

Features & Details

 
Features
Material Brass ring, stem and centre cap · natural alabaster disc · metal backplate
Finish Brushed brass, hand finished
Stone Natural alabaster — veining and translucency vary from disc to disc
Light Source Integrated LED — no bulb to buy or replace
Power Max 60W — 2700K warm white is the intended look
Mounting Wall mount — hardwired to a junction box, disc hangs below the backplate on a brass stem
IP Rating IP20 · indoor dry locations only · not waterproof
Dimming Dimmable with a compatible LED wall dimmer — confirm your dimmer model with us before ordering
Style Modern Regency · Modern luxe · Organic modern · Contemporary · Transitional
Application Bedside wall · Hallway · Entryway · Bathroom vanity · Mirror or fireplace flanking (indoor only)
Specification
Voltage 110V–240V (optional)
Installation Hardwired wall mount — professional installation by a licensed electrician recommended
Control Works with a standard wall switch — switch not included
Stem Drop length customisable — email support@hoailamp.com before ordering
Certification UL · CE · SAA
Warranty 2-year manufacturer warranty

Caring for alabaster and brass: dust the disc and the brass with a dry, soft cloth, supporting the stone from below rather than pushing it sideways on the stem. Alabaster is porous and the brass is hand finished, so never spray cleaner directly onto the fixture — water marks the stone permanently and polish cuts through the brushed grain. Switch the power off at the wall and let the fixture cool before cleaning.

Find Your Fit

Four Feet Tall, Ten Inches Wide

A sconce usually spreads sideways to make an impression. This one goes down instead, filling a tall wall on a footprint no wider than a dinner plate.

⌀ 9.8″  ×  H 51.1″
One size · full drop measured from the top of the stem
 

51.1″

overall drop

Over four feet from the top of the stem to the base of the disc. That length is what lets the fixture carry a tall bare wall on its own.

 

9.8″

disc diameter

Under ten inches across, so it fits the narrow strip of wall beside a bed or a mirror where a wider fixture would crowd the frame.

 

40–44″

to the disc, off the floor

Where the glow should sit beside a bed. Work backwards from there: the junction box lands roughly four feet higher, near the top of the stem.

Sondriel Round Alabaster Wall Light dimension diagram — 9.8 inch disc on a 51.1 inch drop | HoaiLamp
Where to Hang It Beside a bed, above an entry console, along a hallway, or flanking a mirror or fireplace. Leave a clear 14″ of wall on either side so the disc reads as an object rather than as something wedged in.
Placing the Junction Box The backplate sits near the top of the stem, roughly four feet above the disc. Decide where you want the glow first, then measure up — this is the step people get wrong, and moving a box afterwards means patching the wall.
Setup Hardwired to a standard junction box — a licensed electrician is recommended. The LED is integrated, so there is no bulb to fit; 110V–240V is specified at order, and it works with a standard wall switch.

One thing to check: hold a tape measure on the wall before you commit. A 51.1″ drop needs the wiring high, and on a short wall the disc can end up sitting behind a headboard or a console. If your box is already fixed at the wrong height, ask us about a shorter stem before ordering.

 

Selecting Your Stone

We Can Steer the Stone. We Cannot Copy It.

Alabaster is quarried, not manufactured. The seams in a block were set down long before anyone cut a disc from it, so the piece that reaches you will differ from every photograph on this page — and if you order a pair, the two discs will differ from each other.

That is not a limitation we work around. It is the reason to use stone at all.

Tell Us a Direction

• Paler and more even
• Stronger grey movement
• Warmer, amber-toned
• Veining kept toward the outer ring
• Matched as closely as possible across a pair

Any of these we can work toward. A specific pattern from a photograph we cannot.

Six workshop views show alabaster cut and finished, each piece carrying different veining.

Stone in our workshop, cut for several different pieces — shown for the range of the material, not the shape of this fixture.

Selection happens when the discs are cut, so it has to be arranged with the order. Tell us the direction you want — we can also photograph the actual stone before it ships.

Request a Stone Selection →

 

Lit & Unlit

A Halo at Night, an Object by Day

Switched on, the light escapes around the brass cap and turns the whole disc into a ring of glow. Switched off, it is a piece of pale stone in a brass frame, hanging on a wall like something you chose rather than something you installed.

The round alabaster wall light switched on, glowing warm around its brass centre cap.

Lit

Light Comes Out Around the Cap

The brass disc at the centre blocks the source, so the stone glows as a ring rather than a single bright face. The veining shows through the warmth, and the brass rim picks up a line of light at the edge.

The same fixture unlit against a concrete wall, showing cool white stone inside the brushed brass ring.

Unlit

Pale Stone in a Brass Frame

In daylight the stone reads cool and cloudy against the brushed brass, and the long stem holds it on the wall like a hung object. This is how the piece looks for most of the day.

Light Source Integrated LED at 2700K warm white. There is no bulb to buy, and no bulb to get wrong.
What You See Accent light, not task light. It lights the wall around it and the immediate area, so pair it with a reading lamp if you want to read in bed.
No Glare The brass cap sits between you and the LED, so nothing points into the room. It can hang at eye level in a hallway without ever being uncomfortable to walk past.
Every Disc Differs Lit is where the stone shows itself. Your veining will not match these photographs, and on a pair the two discs will not match each other.
Dimming Works with a compatible LED wall dimmer. Turned low, the ring reads as candlelight around the brass rather than as a lamp.

Worth thinking about before you place it: most wall lights are only considered switched on. This one is in view all day, so choose the wall for how the unlit disc sits against it — against pale plaster it reads quiet, against a dark or textured wall the brass ring does the work.

Why Alabaster Looks Grey Instead of Gold →

 

Where It Goes

It Wants a Tall Empty Wall

The long stem is what makes this work above furniture. It fills the height between a piece and the ceiling, which is exactly the stretch of wall most rooms leave bare. Three of the four settings below use a pair — two stems set a rhythm that one cannot.

A pair of round alabaster wall lights glowing on either side of a bed.

Bedside · Pair

A Pair Above the Nightstands

The stems clear the headboard and drop the glow to just above the nightstands, leaving both surfaces free. Set the two boxes at the same height so the discs land level with each other.

Box at 84″ · centres 36–42″ apart

Two brass and stone wall lights flanking a mirror in a French-style entryway.

Entry Mirror · Pair

Flanking a Tall Mirror

The stems echo the height of the frame and the discs sit level with its midpoint, so the mirror and the two lights read as one arrangement rather than three separate things.

6–10″ clear of the frame on each side

Two long stem wall lights hanging above an entryway console table.

Console · Pair

Bracketing a Console

Set in from each end, the pair frames whatever sits between them and lights the surface from both sides without taking any of it.

Box at 90″ · aligned with the console ends

A single alabaster disc light glowing above a sideboard in a quiet room.

Sideboard · Single

One Piece, Off Centre

Where a pair would be too much, a single fixture set to one side breaks the symmetry the way a piece of art would, and still gives the room a low warm source in the evening.

Single · set in from the end of the piece

If You Are Hanging a Pair
Both Boxes, One Height Set the two junction boxes at exactly the same height off the floor. On a fixture with a 45″ drop, half an inch of difference at the box is half an inch of difference at the disc, and it shows.
Matched, Not Mirrored A pair reads as a pair in tone and character, but alabaster is quarried, not printed. The two discs will never carry the same veining.
Wiring Twice Two fixtures means two boxes. If an electrician is already running one, adding the second at the same time costs far less than calling them back.
One Switch or Two Beside a bed, most people put each side on its own switch. Over a console or a mirror, one switch for the pair is usually enough.

Ordering two: set the quantity to 2 above and note “pair” at checkout. We then cut both discs from stone selected together, so tone and veining stay in the same family.

Each disc is cut from a different block of alabaster, so the veining in your room will not match these photographs.

 

Before You Order

The Box Goes High. The Light Lands Low.

This is the one measurement people get wrong. The disc hangs about 45″ below the backplate, so a junction box at normal sconce height would put the glow down at nightstand level. Check where your wiring actually is before you order.

Bedside Elevation

Drawn to scale in a 9 ft room, with the box at 7 ft

9 ft ceiling bed 24″ 84″ to the box 39″ to the disc 45″ drop

Room, bed and nightstand shown for reference only and are not included.

Your Box Sits At Disc Lands At What That Suits
96″ (8 ft) 51″ off the floor Hallways, entries and open wall runs, where the glow sits near eye level for someone standing.
90″ 45″ off the floor Above a console or beside a mirror, clear of the tabletop and the frame.
84″ (7 ft) 39″ off the floor The bedside position shown above — the disc sits just above a 24″ nightstand.
Under 78″ 33″ or lower Too low. The disc ends up level with a nightstand or behind a headboard — ask us about a shorter stem instead.
How to Measure Mark the spot on the wall where you want the glow, then measure 45″ straight up. That is where the junction box has to be.
Standard Sconce Boxes Most existing sconce wiring sits at 60–66″, which would drop the disc to knee height. This fixture needs its own box set higher, or a shortened stem.
Hanging a Pair Set both boxes at the same height and 36–42″ apart over a bed. Any difference in box height shows twice over on a fixture this long.
Low Ceilings Under an 8 ft ceiling the box has to sit close to the top of the wall. Tell us your ceiling height and we will confirm the fit before the piece is built.

Send us your numbers instead: the height of your junction box off the floor and your ceiling height are enough for us to tell you exactly where the disc will land — and whether a shorter stem would suit the wall better. Far easier to sort out before the fixture is built than after it arrives.

How High to Hang a Wall Sconce →

 

Care & Cleaning

Dry Cloth, and Hold the Stem

Two materials, two things to avoid: alabaster is porous and stains, brushed brass scratches. Neither wants water, and neither wants polish. Everything else is just dust.

Do

Dust the disc and the brass with a dry, soft cloth, wiping around the ring rather than across it.

Steady the stem with your free hand so the disc is never pushed sideways.

Switch the power off at the wall and let the fixture cool before you touch it.

Lift a fingerprint off the brass cap with a barely damp cloth, then dry it straight away.

Check the backplate screws once a year — a long stem puts steady leverage on them.

Don’t

No water, glass cleaner, vinegar or alcohol on the stone — the marks do not come out.

Never spray anything at the fixture; liquid runs down the stem into the backplate.

No metal polish on the brass — it cuts through the brushed grain and leaves a shiny patch.

Don’t hang anything from the stem or use it to steady yourself on a ladder.

Don’t rotate the disc to reposition it — adjust from the backplate instead.

Alabaster Disc Dry dusting only. The stone absorbs liquid, so a water mark sits in the surface permanently rather than wiping away.
Brushed Brass Wipe along the grain, never in circles. Unlacquered brass mellows over the years; that shift in tone is normal and not a defect.
The Stem Run the cloth down its length in one pass. It is the part people grab by reflex, and fingerprints show on a vertical surface more than anywhere else.
Bathrooms IP20, dry locations only. Fine beside a vanity in a ventilated room, not inside a shower zone or anywhere it takes direct steam.
No Bulb to Change The LED is integrated, so there is no routine reason to open the fixture. Dusting is the whole of the maintenance.

If something happens to the stone: a chip or a fresh mark on alabaster is often improvable, but the fix depends on where it is. Send us a photo before you try anything — the wrong product turns a mark that would have faded into one that stays.

 

Questions, Answered

Alabaster Wall Light FAQ


How high does the junction box need to be?
The disc hangs about 45″ below the backplate, so mark where you want the glow and measure straight up from there. Most existing sconce wiring sits at 60–66″, which would put the disc near knee height — this fixture usually needs its own box set higher.
Is the stone real alabaster?
Yes — natural alabaster, cut and polished from solid stone. The grain runs differently through every disc and the glow varies with the thickness of the cut. A printed acrylic panel repeats the same pattern on every unit; stone cannot.
Is there a bulb to buy?
No — the LED is integrated at 2700K warm white. Nothing to fit, and no chance of a cool white bulb turning the stone grey. It also means the light source is not user-replaceable, which is covered by the warranty.
Can it be dimmed?
Yes, with a compatible LED wall dimmer. Because the driver is built in, not every dimmer will work cleanly — send us your dimmer model before ordering and we will confirm.
How bright is it?
Accent light, not task light. The brass cap blocks the source so nothing points into the room, which means it lights the wall and the area around it rather than a whole bedroom. Pair it with a reading lamp if you read in bed.
If I buy two, will they match?
They read as a pair in tone and character, but alabaster is quarried, not printed — a pair is matched, not mirrored. Set both junction boxes at exactly the same height; on a 45″ drop, any difference at the box shows at the disc.
How do I clean it, and can I use it in a bathroom?
Dry, soft cloth only. Alabaster is porous and the brass is brushed, so avoid water, glass cleaner, vinegar and any polish — and never spray at the fixture, since liquid runs down the stem. It is rated IP20: fine beside a vanity in a ventilated room, not inside a shower zone.

Shipping Made Simple

We’ve got you covered with easy and reliable shipping options

Total Delivery Time = Processing Time + Shipping Time

Processing or Handling Time :
The processing time begins from the date you place your order. It usually takes 3 to 5 Business Days (Monday to Friday) to process your order. Once we’ve processed it, we can then ship it.

Customized products: Customized lighting fixtures require additional production time. Please note that the processing of such orders may require an extra 5-12 business days, and the total estimated delivery time will be extended accordingly. 

Shipping Charge and Transit Time:
Free Standard Shipping (25-40 business days): Free for all orders.
Expedited Shipping (9-14 business days): Faster delivery is available—please read our Shipping Policy for specific fees.

Thank you for shopping with us. We understand that you want every item you purchase to perfectly suit your home. To ensure a pleasant and worry-free shopping experience, please read the following policy carefully before making your purchase.

1. Return Period and Product Condition

Our standard return policy is valid for 30 days from the date you receive your order. If more than 30 days have passed since delivery, unfortunately, we cannot offer a refund or exchange.

Important: Items that have been installed, have broken wiring, or loose crystals are not eligible for return.

All returned items must meet the following requirements:

  • Original Condition: Must be unused, unworn, and include all original tags, labels, and packaging.

  • Complete Accessories: All accessories, manuals, and included items must be intact. Items requiring assembly must be returned unassembled.

  • Proof of Purchase: You must provide a valid order number or proof of purchase.

Exceptions – Cannot Be Returned:

  • Customized, modified, or special-order items (including products marked “Custom Invoice,” “Made to Order,” or “Final Sale”).

  • Items not in their original condition or packaging (used or altered).

  • Returns caused by misunderstanding the product listing.

2. Eligible for Returns/Exchanges

Customers are entitled to a full refund or replacement in the following cases:

  1. The product is damaged due to quality issues or transportation.

  2. Any item returned to sender undelivered.

  3. Any item not delivered within 90 days.

For all eligible returns, we bear all costs and guarantee 100% return/refund or free replacement.

3. Not Eligible for Return/Exchange

Certain items are not eligible for returns or exchanges:

  1. Products that do not qualify for the 30-day return policy.

  2. Bespoke, custom, or special-ordered products.

  3. Products not in original condition or packaging.

4. Shipping Costs for Customer-Initiated Returns

If a return is initiated due to the customer’s personal reasons, the customer is responsible for the return shipping costs. The exact fee depends on the chosen courier service. Customer-related reasons include:

  • The customer feels the product does not meet their expectations;

  • The customer finds the size too small or too large;

  • The customer believes the color does not match expectations;

  • The customer wants to return the product for personal reasons (e.g., changed mind or no longer needs the item);

  • The customer ordered the wrong item or quantity;

  • The customer did not carefully read the product description and is surprised by the product’s features or specifications.

5. Return & Exchange Process

Before returning any items (within 30 days), please contact our customer service team. Returns without prior authorization will not be accepted.

Step 1: Submit Your Request
Email support@hoailamp.com with:

  • Order number

  • Item(s) to return or exchange

  • Detailed reason for return/exchange

  • Photos if there is a quality issue

Step 2: Wait for Authorization

Before sending your package, you must contact Hoailamp via email to obtain an RMA (Return Merchandise Authorization) number. Items sent without authorization may not be processed.

Email: support@hoailamp.com

Once approved, please send your package to the following return address and follow the packaging instructions carefully:

Return Address:
Recipient: Zhang Lei
Address: Building 4, No. 80 Longxi Road, Jianghai District, Jiangmen City, Guangdong Province, China
Postal Code: 529080

Step 3: Package & Ship

  • Take photos of the product and packaging before shipping to show it is in original condition.

  • Include order confirmation, all original accessories, and packaging.

  • Email us the tracking number after shipping.

Step 4: Refund or Exchange Processing

  • Refunds:

    We will refund to your payment account after returned once the refund approved. Keep in mind that it may also take some time for your bank or credit card company to process and issue your refund. 

    If you paid with a credit or debit card, we will refund your money to the same card once we receive your return. Refunds will take 5-7 business days.

    If you paid with PayPal, we will refund your money to your PayPal account once we receive your return. Refunds will take approximately 1-3 business days.

    To check the status of your refund, please visit the your Account- Orders history page.

  • Exchanges: We will process your return within 3–5 business days after receiving the returned item, and ship the replacement once the inspection is completed.

6. European Union 14-Day Cooling-Off Period

EU customers have the right to cancel or return an order within 14 days without justification. The item must be unused, with tags, and in original packaging, with proof of purchase.

7. Special Conditions

  • Order Cancellation: Within 24 hours of confirmation, free of charge.

  • Custom Items: Cannot be canceled.

  • Non-Custom Items:

    • Cancel within 24 hours of placing the order, no cost.

    • Cancel after 24 hours but before shipment, $50 handling fee.

    • Once shipped, orders cannot be canceled.

8. Contact Us

If you have any questions about returns, exchanges, or cancellations, contact our customer service team:

Hoailamp reserves the right to update or modify this policy at any time without prior notice.

We are committed to providing a safe, secure, and seamless shopping experience. Protecting your personal information and payment security is our highest priority.

1. Website Security

We take online security seriously and implement industry-standard measures to protect your data throughout your browsing and shopping experience.

Secure Encryption:
Our website uses advanced SSL/TLS encryption technology. All data transmitted between your browser and our servers—including personal information and payment details—is fully encrypted to prevent unauthorized access or interception.

Privacy Protection:
We comply with strict privacy standards and only collect the information necessary to complete your order. All customer data is handled with care and protected through secure systems.

2. Payment Security

We use Shopify Payments to process all transactions securely and reliably. Every payment is protected by industry-leading security standards to ensure a safe checkout experience.

Accepted Payment Methods:
Visa, Mastercard, American Express, Diners Club, Discover, Shop Pay, and JCB.

Shopify Payments Security:
All payments are processed through Shopify Payments, a PCI DSS Level 1 compliant platform. It uses advanced encryption and fraud detection technologies to safeguard your payment information. Built on Shopify’s trusted infrastructure, it ensures every transaction is fast, secure, and reliable.

Important Note:
We do not store or have access to your credit or debit card information. All payment details are securely processed and encrypted by Shopify Payments throughout the entire transaction process.

3. Our Commitment

We are dedicated to providing a secure and worry-free shopping experience. If you have any questions regarding payment security or data protection, please contact our customer support team:

support@hoailamp.com

We are always here to help.

Sondriel Round Alabaster Wall Light

Sondriel Round Alabaster Wall Light

FAQS

Looking to make your lighting truly one-of-a-kind?

You can customize the size, color, and material of many of our fixtures! Explore all the possibilities and start designing your perfect piece on our Customization Page.

Have questions or specific requests? Our team is happy to help: Email: support@hoailamp.com

Wondering if this light works with your local voltage? The U.S. standard is 110–120V, and Europe uses 120–240V. We can also customize the voltage to fit your needs. For more details on global voltage standards, check out our Global Voltage Reference Guide.

Yes, all of our lighting fixtures are certified to meet the safety and compliance standards of the regions they are shipped to, including SAA/CE Certifications and UL certifications. For more details on our certifications, visit our Certification Page.

Please be aware that all prices shown on our website do not include duties, local taxes, or any other import charges. In most cases, our parcels pass through customs without VAT being charged. However, for larger orders or certain circumstances, we may need to provide additional information to customs and cooperate with the buyer to supply the required paperwork.

Each destination country has its own import tax threshold, which determines the value of goods that can be imported before import duties are charged. Import duties, taxes, and other charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility, and we are not liable for any delays caused by customs authorities in your country.

For more details regarding applicable fees, we recommend contacting your local customs office.

Many of our fixtures are compatible with dimmer switches. Please check the product description or contact us to confirm dimming compatibility before purchase.

Natural Alabaster Lighting Fixtures

Sculpted by Nature, Refined by Line

Organic Geometric Elegance

Each natural alabaster disc features entirely unique, cloud-like veining with subtle translucency. It serves as a sleek geometric wall sculpture when unlit and casts a warm, soft ambient glow when illuminated, instantly adding warmth and depth to the space. Paired with a slender vertical rod and a precision-brushed brass center cap, the striking contrast between organic natural stone and refined metallic hardware creates a sophisticated, modern statement.

Authentic natural alabaster, brushed brass hardware, slender geometric silhouette.

Glare-free, soft diffused ambient illumination
Refined hand-brushed brass with anti-oxidation finish
100% Genuine Natural Alabaster with unique mineral veining
Artisanal hand-carved and hand-polished craftsmanship

Why Choose Our High-Quality Materials?

Quality determines everything; we use only the finest materials.
Premium Selection
Our High-Quality Materials

Our High-Quality Materials

Natural Alabaster Stone: Features authentic, non-replicable mineral veining with a stunning organic translucency; solid, heavy, and premium to the touch.

Premium Solid Brass: Heavyweight, durable metal with superior anti-oxidation and rust resistance; its refined hand-finished texture preserves its beauty for a lifetime.

Ordinary Materials

Ordinary Materials

Artificial Resin Stone: Mass-produced from cheap plastics and chemical adhesives; features mechanically repetitive patterns, lacks natural depth, and easily yellows or cracks over time.

Inferior Iron Sheets: Common low-grade sheet metal that is lightweight and rough; highly prone to severe rusting, corrosion, and structural degradation over time.

VS

100% Natural Materials

Premium Materials: Eco-friendly and Healthy.

Exquisite Craftsmanship

The perfect fusion of craftsmanship and modernity.

Durable and Long-lasting

Specially treated for a long service life.

Unique Aesthetic

Unique Natural Textures.

Manufacturing Process

From Raw Stone to Work of Art — Every Step Is a Pursuit of Perfection
Alabaster MiningOur High-Quality Materials
1

Alabaster MiningOur High-Quality Materials

Cutting and FormingCut manually or mechanically.
2

Cutting and FormingCut manually or mechanically.

Meticulous PolishingShowcases natural texture and luster.
3

Meticulous PolishingShowcases natural texture and luster.

Quality Inspection and InstallationStrict Quality Inspection and Assembly.
4

Quality Inspection and InstallationStrict Quality Inspection and Assembly.

Recently viewed products

FREE SHIPPING

Free Shipping for all orders

SUPPORT 24/7

Contact us 24 hours a day, 7 days a week

30 DAYS RETURN

Simply return it within 30 days for an exchange.

100% PAYMENT SECURE

We ensure secure payment with PEV